鑫弘展
Products
visual system FH
Product Description

The generation's eyes achieve the highest level of high-speed accurate image sensing.
In a compact machine, OMRON is equipped with image sensing technology that is indispensable for inspection and measurement. In addition to the camera that achieves high-sensitivity, high resolution imagery, it also checks the software package required for measurement into the system, eliminating the need for high levels of programming and machine combinations to achieve high-speed, accurate inspection measurements that replace human eyes.

Support camera styles for various purposes
High speed, precise use...
Lens ring camera
The camera can be freely selected and combined with the lens required for the purpose.

FH Features 4
New rolling shutter camera type is complete
In recent years, rolling shutter cameras have regained favor due to their high cost affordability. The rolling shutter camera takes pixels separately for each line, so the image is distorted when shooting a moving object, but high-resolution inspection and measurement can be realized at low cost.

FH Features 5
Easy to install on your device...
Lighting integrated camera
 

Thanks to the integrated construction of the illumination and the lens, it can be easily mounted to the manufacturing machine.

※The FQ2 of the smart camera type is also available.

 

High power lighting
 

Built-in high-power illumination that is fully illuminated on average with a wide field of view.

Even with the attached polarizing filter, you can ensure sufficient light source brightness.
 

Lens
Thanks to the focus adjustment function, clear images can be obtained by lifting the installation distance according to the customer's desired field of view.

When installing in a narrow space...
Small camera
 

It is also possible to assemble an ultra-small lens in a narrow space in the device.

It can be selected from the flat type and the pen type depending on the equipment space.

 

FH Features 11
Controller that supports high-speed accurate inspection and measurement
All three types
 

The controller can be freely selected according to the environment of use.

The setting data of the same software assets belonging to all controllers can be utilized, and the applicable machine can be designed according to the required specifications.

 

FH Features 12
Transfer images without delay
 

The FH-3050/-1050 series is equipped with a durable image transfer USB.

If you don't choose to connect a camera, you can build an application that maximizes the camera's specifications.

 

FH Features 13
Object Detection Algorithm for "High Speed Accurate Inspection and Measurement" "Shape Search III"
Precise object detection
Even with out-of-focus images, position can be detected with low error
OMRON has been studying the technology of high-speed search and comparison of templates. Based on this technology, the greatly evolved shape search III was finally born, which improved the durability of the FA field. In the case of bonding glass, etc., each workpiece is different from the camera. Therefore, errors such as shape size error or out-of-focus are easily generated during measurement, but as long as the shape is searched by the shape of the new algorithm, the error can be low. Detection location.

FH Features 16
High-precision search that maintains low error even under unstable search conditions
Even in the following unstable conditions that occur frequently during actual measurement, high-precision search is still possible.

FH Features 17
Multiple workpiece inspection
Even if there are multiple workpieces in the field of view, the search can be performed without reducing the detection accuracy.

FH Features 18
Background noise, glossy workpiece inspection
Stable search without the influence of background and gloss.

FH Features 19
FH Features 20
What is Think & See?
 

This is OMRON's core image sensing technology.

Focusing on diverse environments, it measures, detects, and identifies the position, posture, shape, material, color, status, and attributes of various sensing objects such as objects, people, and vehicles faster than the human eye.

Think & See is used in Shape Search III.

 

FH Features 22
http://www.omron.co.jp/r_d/technology_thinkAndSee.html

Super high speed Previous search ratio 1/9
 

The new technology is applied to the search process with high frequency of use, and the clearing speed is up to 9 times that of the past search. In addition, even when the shooting conditions such as ambient light, overlap, gloss surface, and defect are unstable, the object can be stably searched at the original speed, and the stability is greatly improved.

 

FH Features 23
Easily set high-precision search by visualizing the verification status [patent pending]
 

The high-performance search feature has a variety of parameters that can be paired with the application and freely adjusted. However, it is difficult for the setter to have a glimpse of the internal processing process, so to make full use of the calculation performance, it requires a lot of adjustment time and technology.

Shape Search III allows you to view the model data and the local verification status of the measurement object. It is easy to know if there are any parts that are not well verified. Therefore, it is easy to adjust the rich parameters and optimize the performance while confirming the verification value.

 

FH Features 24
By adjusting the parameters of the allowable distortion value, the measurement can be performed even if the distortion maintains the original correlation value. It is easy to adjust this parameter while confirming the verification status.

Pre-installed field operator GUI and designer GUI
Field operator with GUI
 

The FH series is pre-installed with an on-site operation screen.

By switching the screen layout, you can switch to the operation screen, so no troublesome screen development is required.

 

Designer GUI
 

By arranging the "processing items" that implement the inspection and measurement as the flow, the contents of the inspection measurement can be set.

The detailed measurement condition settings are also equipped with a GUI, which can be set by intuitive operation.

 

Available in 9 languages, so it is also available for foreign use
 

In addition to Japanese, the display message can be switched to a total of 9 languages including English and Chinese.

Even in foreign countries, users in the field can choose a language that is easy to operate.

 

Field setting
FH Features 30
 

A touch screen (FH-MT12 type) for the FH series that supports the IP65 protection structure is available.

Because it is a resistive film method, it can operate under the Globe.

 

Display configuration
FH Features 31
Pre-installed screen configurations can be customized by drag and drop. The required configuration can be easily implemented.

Inspection process design
FH Features 32
The detection and measurement process can be constructed by dragging. In addition to the manufacturing site design process, design and simulation can be performed in an offline environment.

Simple programming
FH Features 33
Supports the assembly of user macros, and realizes data processing that is difficult to install only by designing the test flow. It can be easily installed by BASIC LINK programming.

Flexible function to achieve high adaptability to manufacturing machines
Remote operation via Ethernet
 

Remote operation functions for operating the FH Series via the remote end of the Ethernet are available.

Install the tool on your computer and simply operate the FH series by specifying the IP address.

 

FH Features 35
Assemble to user application
 

A Microsoft.Net basic software accessory for assembling FH screens to PC-Based HMI, etc. is available.

The FH series screen and the screen accessories corresponding to the result display can be added to the HMI software developed by the customer.

 

FH Features 36
Integration with the mechanical controller development environment
 

When using Sysmac NJ/NX from OMRON, you can use the automation software Sysmac Studio to integrate the FH series setup operations. It is also possible to perform simulation and debugging functions that integrate functions such as "motion control, logic, drive, and sensing" to help reduce the number of design man-hours for the machine.

 

FH Features 37
Provide a software transformation environment
 

Using the Application Producer (FH-AP1 type) of the development environment, you can customize the software that is pre-installed on the FH series controller.

For example, original images created using Microsoft Visual Studio can be assembled and used on the FH series controller.

 

FH Features 38

Design by Web5000網頁設計.
Design by web5000 網頁設計